Sheepskin careWashing sheepskinWoolskin

How to Clean & Wash Sheepskin: Machine, Hand Wash & Drying

Down-Under Wool Published Updated

How to Clean & Wash Sheepskin: Machine, Hand Wash & Drying

Sheepskin can be washed at home if it was tanned to be washable, and AS4480.1 medical sheepskins are. The rule that matters most is temperature: wash in cool or lukewarm water with a sheepskin wash such as Woolskin, never hot water unless the tag says HiTemp, and dry it slowly away from heat. Down-Under Wool has looked after medical sheepskins since 1988, and the steps below are the ones we give our own customers. HiTemp UR medical sheepskins have withstood more than 200 hot wash-and-dry cycles and stayed soft, so a sheepskin washed the right way lasts for years.

Can you wash sheepskin?

Yes, a sheepskin can be washed if it was chrome tanned to be washable. Check the tag or the stamp on the leather backing before you start. If there is neither, treat the sheepskin as dry clean only, because the wrong tanning can turn the leather hard and shrink it the first time it gets wet.

Washable sheepskins come in two kinds, and the difference is the water temperature they can take:

SheepskinWaterMachine wash?Dryer?
HiTemp UR medical sheepskin (AS4480.1), e.g. M102, M102Ccool to hot, up to 80°C (175°F)yes, gentle or wool cyclelow heat, gentle, until nearly dry
Washable lambskin, e.g. the Healthcare Lambskin (M101)cool or lukewarm only; hot water may shrink itif the tag allows, gentle or wool cycleair drying is safest
Sheepskin slippers and bootscoolno, hand wash onlyno; air dry
No tag or stamp (rugs, coats, decorative skins)nonenono; dry clean

Green Australian medical sheepskin, HiTemp washable

What you need to wash a sheepskin

  • A sheepskin wash. We use Woolskin, which the Australian tanning industry developed for sheepskins. It cleans and disinfects, conditions the wool and the leather, and contains tea tree oil.
  • Not an ordinary wool detergent. Wool detergents such as Woolite are not recommended for sheepskins, because they can contain enzymes, bleach, phosphates or alkali that damage the leather for good.
  • A tub or a washing machine with a gentle or wool cycle.
  • A drying rack or the back of a chair, and a soft nylon brush for the wool.

Woolskin sheepskin wash and conditioner with tea tree oil

How to clean sheepskin between washes

Sheepskin needs washing far less often than you might expect. The natural lanolin in the wool coats the fibers, so dust and spills don't stick easily. Wash it when it starts to smell, and in between:

  • Shake it outdoors to remove loose dirt and dust.
  • Brush it with a nylon brush to lift the pile and stop the fibers matting.
  • Vacuum on suction only. Rotating or turbo brush heads tangle and pull the wool.
  • Freshen it with baking soda. Sprinkle it on, work it into the wool, leave it at least two hours (overnight is better), then shake or vacuum it out and brush.

How to spot clean a sheepskin

  1. Act quickly. Acidic spills such as food, urine or vomit can soak into the pile and change its color.
  2. Soak up liquid with paper towels and lift any solids with a spoon or a blunt knife.
  3. Rub the spot gently with a warm, damp cloth and a little Woolskin mixed with water. Woolskin also disinfects the area.
  4. Work outward from the stain so the cleaned patch blends in, then wipe with a clean damp cloth and let it dry.

How to wash sheepskin by hand

Hand washing is the gentlest way to wash a sheepskin, and it suits every washable skin.

  1. Fill a tub with lukewarm water first, then add Woolskin: about 20 mL per pound of sheepskin.
  2. Put the sheepskin in and work the solution through the wool for 5 to 10 minutes.
  3. Squeeze it by hand until it is clean. Don't wring or twist it.
  4. Rinse in cold water until the water runs clear. A second rinse is best.
  5. Remove the excess water on your washing machine's spin cycle, then dry it as described below.

How to wash sheepskin in a washing machine

A machine-washable sheepskin can go in a front-load or top-load washer. Check the tag first.

  1. Choose the gentle or wool cycle. Strong agitation mats and felts the wool.
  2. Add Woolskin: 20 mL for a small load or 40 mL for a full load, and half those amounts in a front-loading machine.
  3. Use cold or warm water. Use hot water only for a HiTemp UR medical sheepskin.
  4. Double rinse, then spin to remove most of the water.

All Woolskin sizes, from the 1 L bottle to the 10 L economy pack, are on our Woolskin sheepskin shampoo and conditioner page.

Washing a medical sheepskin

Medical sheepskins are washed the same way, with one difference: a HiTemp UR medical sheepskin can be washed hot, up to 80°C (175°F), which disinfects it. That is why hospitals and nursing homes can move them from one patient to another. Our Australian Medical Sheepskins are warranted for at least 50 washes in Woolskin when the care instructions are followed. Many caregivers keep two or three, so there is always one on the bed while another dries.

How to dry sheepskin

Dry sheepskin slowly, away from direct heat and direct sunlight. Excess heat damages both the wool and the leather.

  • Air drying: lay it flat or hang it over a drying rack or the back of a chair, leather side up. It usually takes about 24 hours.
  • Tumble drying: only for sheepskins whose tag allows it. Use no heat or low heat on the fluff or gentle cycle, take it out while it is still slightly damp, and finish drying flat. Wool does best with about 15% moisture left in it.
  • Never dry a sheepskin on a radiator, in front of a heater or in hot sun.

More drying detail is on our washing and drying sheepskin page.

How to soften and fluff sheepskin after washing

When the sheepskin is completely dry, brush the wool gently with a nylon brush to separate the fibers and bring back the pile. A sheepskin that comes out stiff was usually washed too hot, agitated too hard, washed in the wrong detergent or dried too fast. Woolskin conditions the leather as it cleans, which keeps it supple.

Washed champagne lambskin with a soft, fluffy pile

Mistakes that ruin sheepskin

  • Hot water on a sheepskin that isn't HiTemp: it shrinks the leather, felts the wool, fades the color and can set stains.
  • Household detergents, wool detergents with enzymes, and bleach.
  • Wringing, twisting or a fast spin with strong agitation.
  • Drying with heat, on a radiator or in direct sun.
  • Putting sheepskin slippers or boots in a washing machine or dryer.

Washing sheepskin slippers, boots and rugs

Sheepskin slippers and boots should only be hand washed. Cover them with cool water in a tub, add about 40 mL of Woolskin, leave them for 10 minutes, then rinse twice. Stuff them with paper towels so they keep their shape, and let them dry naturally, away from heat. Step-by-step guides: how to clean sheepskin slippers and how to clean a sheepskin rug at home.

Sheepskin washing FAQs

Can you wash sheepskin in the washing machine?

Yes, if the tag says it is machine washable. Use the gentle or wool cycle, cool or warm water (hot only for HiTemp UR) and a sheepskin wash, then double rinse. Slippers, boots and untagged sheepskins should not go in the machine.

Can you put sheepskin in the dryer?

Only a sheepskin whose tag allows it, on no heat or low heat with gentle agitation, and only until it is nearly dry. Finish drying it flat. Everything else should air dry.

What temperature should you wash sheepskin at?

Cool or lukewarm for most sheepskins. A HiTemp UR medical sheepskin can be washed at up to 80°C (175°F).

How often should you wash a sheepskin?

Wash it when it starts to smell. Shake and brush it in between, and spot clean spills straight away.

How do you get urine out of a sheepskin?

Blot it up quickly and spot clean with Woolskin, which also disinfects. If the smell stays, wash the whole sheepskin. For bedding that gets wet often, choose a urine-resistant HiTemp UR sheepskin or one of our urine-resistant wool pads.

Can you use Woolite on sheepskin?

It isn't recommended. Ordinary wool detergents can contain ingredients that damage sheepskin leather. Use a wash made for sheepskin, such as Woolskin.

Why did my sheepskin go hard after washing?

Usually because the water was too hot, the machine agitated it too much, the detergent was wrong, or the sheepskin was not tanned to be washable. Hardening, shrinking and felting are not caused by water itself: sheep don't shrink in the rain.

Can you wash a sheepskin coat or jacket?

Follow the label. A sheepskin coat with no washing instructions should be treated as dry clean only.

The short version

Check the tag, shake and brush the sheepskin often, and spot clean spills straight away. When it needs a wash, use cool or lukewarm water (hot only for HiTemp UR), a sheepskin wash such as Woolskin and a gentle cycle, rinse twice and dry it slowly away from heat. Looking for a washable sheepskin? See our machine-washable medical sheepskins, or read what sheepskin is and the types of sheepskin.

For washing sheepskin and wool

Free shipping on orders over $180 to Canada & the lower 48 US states · Quality guaranteed · 30-day returns · Family business since 1988

Browse all products

Ready to protect someone you care for?

Shop AS4480.1 Australian Medical Sheepskin and complete bedsore prevention packages. Free shipping on orders over $180 to Canada & the lower 48 US states.